windows版redis關于日志輸出的配置

問題描述

目前log level為notice，不想配置為warning，不知是否可以配置消息輸出的時間間隔和數據體積的單位？

目前輸出如下，希望能自定義輸出時間間隔，如半分鐘一次，然后數據體積用KB/MB為單位，仔細了解了配置文件，沒發現這類自定義項呢？

[15856] 04 Jan 18:55:46 - 7 clients connected (0 slaves), 113862688 bytes in use[15856] 04 Jan 18:55:51 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:55:51 - 7 clients connected (0 slaves), 113881376 bytes in use[15856] 04 Jan 18:55:56 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:55:56 - 7 clients connected (0 slaves), 113903056 bytes in use[15856] 04 Jan 18:56:01 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:56:01 - 7 clients connected (0 slaves), 113911168 bytes in use[15856] 04 Jan 18:56:06 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:56:06 - 7 clients connected (0 slaves), 113944696 bytes in use[15856] 04 Jan 18:56:11 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:56:11 - 7 clients connected (0 slaves), 113977680 bytes in use[15856] 04 Jan 18:56:16 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:56:16 - 7 clients connected (0 slaves), 114002896 bytes in use[15856] 04 Jan 18:56:21 - DB 0: 2 keys (0 volatile) in 4 slots HT.[15856] 04 Jan 18:56:21 - 7 clients connected (0 slaves), 114040168 bytes in use

問題解答

提出的問題是針對“redis-2.4.5-win32-win64”，更新到“3.2.100”版本后問題解決了。默認notice級別的輸出如下：